NFON-Import

1. Dial the telephone number.

To correct a digit, press .

2. Pick up the corded receiver.

3. After ending the call, return the corded receiver to the cradle.

1. Dial the telephone number and press .

2. After ending the call, press again.

During a call, repeatedly press the navigation button up or down on the base telephone.

The redial list stores the last 10 numbers dialed (max. 32 digits each).

1. Press .

2. Select the desired number by pressing the navigation key up or down.

3. Pick up the corded receiver or press .

- Pick up the handset and dial the telephone number.

To correct a digit, press .

- Press or .

- To end the call, press or return the mobile handset to the charger.

- Dial the telephone number and press .

- To end the call, press .

1. Pick up the corded receiver or press or when the device rings.

2. To end the call, return the corded receiver to the cradle. When using the

hands-free feature, press .

With the base telephone ringing for an incoming call:

Repeatedly press the navigation key up or down to select the desired volume.

Programming the volume in advance:

- (centre softkey)

- Repeatedly press the navigation key up or down to select the desired volume.

-

When a call is coming in, the mobile handset’s ringer indicator flashes rapidly.

- Remove the mobile handset from the charger and press , or , when the device is ringing.

- To end the call press or return the mobile handset to the charger.

Missed calls are indicated in the display of the base telephone (“Missed Calls”). To access the missed calls list, press the softkey .

You can then browse through the missed calls by pressing the navigation key up or down.

Missed calls are indicated on the mobile handset display (“Missed Calls”).

To access the missed calls list, press the softkey .

You can then page through missed calls using / .

1. Press an external call.

The active call is now placed on “Hold”.

When using the corded receiver, you can return it to the cradle.

2. To cancel holding the call, pick up the corded receiver or press or .

- Press during an external call.

The active call is now placed on “Hold”.

- To cancel holding the call, press or .

You are taking a call on the base telephone. The call waiting tone indicates a second call is incoming. Simultaneously, a line icon flashes at the top of the display and the display also shows the telephone number or, for internal calls, the name of the extension.

- Press to accept the call waiting.

Using the you can now switch between the two calls.

- To end a call, return the corded receiver to the cradle during the active call.

When using the hands-free feature, press .

The other call is now on “Hold”.

- Press , to return to the call on hold.

Your Panasonic mobile handset allows you to make a 3-way call.

1. Call the 1st party.

2. Once you have reached the 1st party, press the menu key (Joystick), and select “4=Conference”. You can alternatively press the number “4” on your keypad. The active call is now placed on “hold”.

3. Then call the 2nd party and wait until you have reached the 2nd party.

4. Press the softkey to activate the 3-way call. The display now indicates Conference.

1. Call the 1st party.

2. Once you have reached the 1st party, press the menu key (centre softkey) and select “4=Conference”. You can alternatively press the number “3” on your keypad. The active call is now placed on “Hold”.

3. Then call the 2nd party and wait until you have reached the 2nd party.

4. You can now activate the 3-way call by pressing the softkey. The display now indicates Conference.

Your Panasonic mobile handset allows you to make a 3-way call.

1. Call the 1st party.

2. Once you have reached the 1st party, press the menu key (Joystick), and select “4=Conference”. You can alternatively press the number “4” on your keypad. The active call is now placed on “hold”.

3. Then call the 2nd party and wait until you have reached the 2nd party.

4. Press the softkey to activate the 3-way call. The display now indicates Conference.

During an active call, press the menu key. (centre softkey)

Now, press “1=Send”. You can alternatively press the number “1” on your keypad. The active call is now placed on “Hold”.

Now, dial the party to whom you would like to transfer the call. To do so, dial the party’s telephone number.

Wait for the other party to answer, then announce the call. This step can also be omitted, if necessary.

Press the softkey .

During an active call, press the menu key. (Joystick)

Now, select “2=Send”. You can alternatively press the number “2” on your keypad. The active call is now placed on “hold”.

Now, dial the party to whom you would like to transfer the call. To do so, enter the party’s telephone number and press .

Wait for the other party to answer, then announce the call. This step can also be omitted, if necessary.

Press the softkey .

During an active call, press the menu key. (centre softkey)

Now, press “2=Send blind”. You can alternatively press the number “2” on your keypad. The active call is now placed on “Hold”.

Now, dial the party to whom you would like to transfer the call without making an enquiry.

Press the softkey .

During an active call, press the menu key. (Joystick)

Now select “3=Send blind”. You can alternatively press the number “3” on your keypad. The active call is now placed on “hold”.

Now, dial the party to whom you would like to transfer the call without making an enquiry.

Press the softkey .